Inspection facilities: inlet separation systems, low-temperature separation and cooling of propane, stabilization of condensate, removal of acid gas components, regeneration of gas cleaning agents, removal of mercaptan unit and drying unit, sulfur recovery, storage of lump sulfur, heat and steam supply, water treatment and purification unit, unit of commercial accounting, gathering system, cluster sites and wells.

Functional responsibilities:

Verification the quality and composition of As-built documentation, Technical passports and Test packages for compliance with the contract and regulatory documents.

Supervision of organization and implementation of construction and installation.

Commissioning CPF and fields' facilities.

Participation in the incoming inspection of the equipment arriving at the construction site for compliance with the project, technical specifications, regulatory documents and standards. Checking certificates availability.

Verification and issue of comments for the As-build documentation, procedures, and work production plan according to technological schemes.

Observation and estimation of performed work.

Signature of acts, dossier and other documentation.

Supervision of the quality of installation of process equipment, piping and instrumentation. Participation in all types of testing of pipelines and equipments.

Issue and control of elimination of comments, recommendations and prescriptions for lists of defects, punch lists.

Verification, analysis and issuance of comments for the Contractor's plans and procedures of commissioning.

Supervision over the process of certification of imported equipment (volume of certification, timeliness of obtaining certification, completeness of calibration certificates, certification methods, etc.);

Participation in the inspections conducted at the Project facilities by Designer Supervision, Gosarhstroynadzor authority, Departmental inspections and Customer. Subsequent supervision and control over the timely implementation of prescriptions by Contractor in accordance with the results of inspections.

Support of the Working commissions after completion of the construction and commissioning stage, complex testing and acceptance into service.

Verification and approval of the composition and quality of the commissioning documentation for compliance with the Contract conditions, procedures and regulatory documentation of the Republic of Uzbekistan.

Development and issuance of the process solutions for the Project / Working documentation stages.

Commissioning and handover of Gas treatment complex facilities and fields (gathering system, cluster sites) to the operation service.

Conduction of all types of tests. Development of a procedure of the full-scale test of the main technological and auxiliary equipment.

Check the leak tightness of equipment and joints. Pressure testing equipment.

Drafting commissioning procedures.

Commissioning and output equipments and units to technological mode.

Support during operation of units, verification of the working project for compliance with the requirements of regulatory documentation of the Republic of Uzbekistan;

Checking of process equipments during installation for compliance with the requirements of passports, instructions and working documentation, issuing comments and recommendations regarding installation.

Registration of technical documentation.

Preparation of the As-build documentation, technical passports and test packages for compliance with the contract and regulatory documents.

Pre-design study of the initial data of the technical and commercial proposals.

Development of design technical documentation, working drawings and specifications.

Ensuring the efficient use of resources, checking the work done by workers in accordance with the drawings and specifications, timely implementation, within budget and with due respect for the environment, health and safety of personnel.

The issuance of tasks to adjacent departments.

Analysis of the operation and technical documentation to optimize production and verify that the project complies with the industrial safety requirements of the Republic of Kazakhstan;

Provision of engineering and technical assistance in the preparation of programs for the comprehensive testing of the main process and auxiliary equipment, drawing up procedures for commissioning the equipment.

Preparation of requests for the delivery of all necessary parts for the project.

Accounting for the receipt and expenditure of materials for construction.

Participation in the entrance control of the quality of materials and equipment at the construction site.

Implementation of preparatory and commissioning of the main technological and auxiliary equipment.

Preparation of documentation and process procedure. Checking the leak tightness of equipment and joints.

Pre-commissioning, comprehensive testing of gas treatment equipment and wells.

Pressure testing of equipment. Commissioning of process equipment to technological mode.

Development operating and maintenance documentation.

Theoretical and practical training of operation staff.

Development and implementation of technological processes and equipment to ensure that plant release of competitive products with reduced material and labor costs.

Supervision of erection work on process equipment and pipelines.

Development of methods for individual and comprehensive testing of programs and schedules for commissioning team, design of the handover documentation;

Preparation for commissioning works.

Pre-commissioning, comprehensive testing of gas treatment equipment;

Development of operational and maintenance documentation.

Management of technological processes of production, participation in the development of measures aimed to improve quality, control of their implementation.

Commissioning of process equipment to technological mode.

Implementation of work in super-sever conditions.

Supervision of the installation work of pipelines and process equipment.

Timely accounting of all types of raw components entering to the gas treatment unit.

Registration of the products supplied to the consumer.

Implementation of preparatory and commissioning of the main technological and auxiliary equipment.

Commissioning of process equipment to technological mode.

Control of the process according to the standards of the technological mode, monitoring consumption of chemical reagents.

Coordination of commissioning with specialists of instrument, gas service and fire brigade.

Verification of documentation packages from contractors and manufacturers during handover and commissioning.

Verification of the correctness and compliance of the control findings during the registration of acts and other documentation of completed mechanical and pipeline construction and commissioning.

Interaction with the Commissioning, Completion, QA/QC and other teams to ensure that the Contractors project documentation, records and acts have been properly uploaded into the Completions Management System.

Checking of technological drawings, preparation of technological procedures.

Implementation of preparatory and commissioning of the main technological and auxiliary equipment of the facility (flushing, purging, inertization, pressure testing).

Supervision of the work of subcontractors.

Control over the development of operating and maintenance documentation.

Implementation of preparatory and commissioning of the main technological and auxiliary equipment of the facility.

Commissioning of process equipment to technological mode.

Supervision of the work of subcontractors (pressure testing, checking of the seams and joints for the possibility of leakage).

Theoretical and practical training of operational staff.

Technical assistance and support during the initial operation of the installation.

Analysis and adaptation of project documentation for the construction of oil refinery.

Supervision of assembly pipelines and process equipment.

Commissioning and comprehensive testing of equipment.

Technical assistance and support during the initial operation of the installation.

Monitoring the work of subcontractors.

Commissioning of process and auxiliary equipment of the facilities.

Technical assistance and support during the initial operation of the installation.

Support during service of the units.

Control and support of technological mode of workshop.

Elimination of emergency situations and lead of the process unit to the technological mode according to the PLUS.

Control over the operation of technological equipment and instrument according to technological procedures.